https:\/\/kb.sambapos.com\/wp-content\/uploads\/2025\/07\/Wintec-Video.mp4<\/a><\/video><\/div>\r\nImportant Note:<\/strong><\/span><\/p>\r\nIn order to list Wintec Scale Device under the SambaPOS > Devices section, your SambaPOS version must be 5.7.22 or above.\u00a0\u00a0<\/span><\/strong><\/span> \u00a0 \u00a0<\/p>\r\n1. Installing Scale Module on Samba Market<\/strong><\/h3>\r\nYou need to install Scale Module<\/strong> on Samba Market and restart the SambaPOS.<\/strong><\/p>\r\nMain Menu > Samba Market > Click on Install<\/strong> button in Scale Module Part.<\/p>\r\n![\"\"](\"https:\/\/kb.sambapos.com\/wp-content\/uploads\/2023\/09\/CAS-PDN-Scale-ENG-01-1024x549.jpg\")
<\/p>\r\n
<\/p>\r\n
After installing the scale module, you need to restart SambaPOS.<\/strong> <\/span>\u00a0 \u00a0<\/p>\r\n\u00a0<\/h3>\r\n
<\/p>\r\n
2. Moving Necessary DLL Files<\/strong><\/h3>\r\nWhile SambaPOS is completely shut down<\/strong><\/span> navigate to C:\\Program Files (x86)\\SambaPOS5\\wintec<\/p>\r\nCopy the following files;<\/strong><\/p>\r\nWintecDriverDisplay.dll<\/strong><\/span><\/p>\r\nWintecLibDSD.dll<\/strong><\/span><\/p>\r\nPaste them into This PC > Local Disk (C:) > Program Files (x86) > SambaPOS5<\/strong><\/p>\r\n <\/p>\r\n
<\/p>\r\n
3. Adding Wintec Scale as a Device from SambaPOS<\/strong><\/h3>\r\nGo to Main Menu > Manage > Settings > Local Settings > Devices > Add Device > Select Wintec Scale <\/strong>><\/strong> Click on Settings<\/strong> button and configure it according to below image.<\/p>\r\n![\"\"](\"https:\/\/kb.sambapos.com\/wp-content\/uploads\/2025\/07\/Wintec-Scale-00-1024x550.jpg\")
<\/p>\r\n
<\/p>\r\n
Port:\u00a0<\/strong>Select the port your device is connected.<\/p>\r\nAfter completing necessary editings, click on Save<\/strong> button.<\/p>\r\n <\/p>\r\n
<\/p>\r\n
4. Adding Automation Commands<\/strong><\/h3>\r\n4.1. Adding Send Tarra to Wintec Automation Command<\/strong><\/h4>\r\nMain Menu > Manage > Automations > Automation Commands ><\/strong> Here, click on Add Automation Command<\/strong> button.<\/p>\r\nGeneral Settings Section;<\/strong><\/p>\r\n![\"\"](\"https:\/\/kb.sambapos.com\/wp-content\/uploads\/2025\/07\/Wintec-Scale-01-1024x550.jpg\")
<\/p>\r\n
Name:<\/strong> Send Tarra to Wintec<\/p>\r\nButton Header:<\/strong> Send Tarra\\rto Wintec<\/p>\r\nMappings Section;<\/strong><\/p>\r\nAdd a line by clicking on Add<\/strong> button and set it as shown in the image.<\/p>\r\n![\"\"](\"https:\/\/kb.sambapos.com\/wp-content\/uploads\/2025\/07\/Wintec-Scale-02-1024x550.jpg\")
<\/p>\r\n
After completing necessary editings, click on Save<\/strong> button.<\/p>\r\n <\/p>\r\n
<\/p>\r\n
4.2. Adding Clear Tarra From Wintec Automation Command<\/strong><\/h4>\r\nMain Menu > Manage > Automations > Automation Commands ><\/strong> Here, click on Add Automation Command<\/strong> button.<\/p>\r\nGeneral Settings Section;<\/strong><\/p>\r\n![\"\"](\"https:\/\/kb.sambapos.com\/wp-content\/uploads\/2025\/07\/Wintec-Scale-03-1024x550.jpg\")
<\/p>\r\n
Name:<\/strong> Clear Tarra From Wintec<\/p>\r\nButton Header:<\/strong> Clear Tarra\\rFrom Wintec<\/p>\r\nMappings Section;<\/strong><\/p>\r\nAdd a line by clicking on Add<\/strong> button and set it as shown in the image.<\/p>\r\n![\"\"](\"https:\/\/kb.sambapos.com\/wp-content\/uploads\/2025\/07\/Wintec-Scale-04-1024x550.jpg\")
<\/p>\r\n
After completing necessary editings, click on Save<\/strong> button.<\/p>\r\n <\/p>\r\n
<\/p>\r\n
5. Adding Actions<\/strong><\/h3>\r\n5.1. Adding Send Tarra to Wintec Action<\/strong><\/h4>\r\nMain Menu > Manage > Automations > Actions ><\/strong> Here, click on Add Action<\/strong>\u00a0button.<\/p>\r\n![\"\"](\"https:\/\/kb.sambapos.com\/wp-content\/uploads\/2025\/07\/Wintec-Scale-05-1024x550.jpg\")
<\/p>\r\n
Action Name: <\/strong>Send Tarra to Wintec<\/p>\r\nAction Type: <\/strong>Send Data To Scale Device<\/p>\r\nParameters:<\/strong><\/p>\r\nData:<\/strong> <tarra><\/p>\r\nAfter completing necessary editings, click on Save<\/strong> button.<\/p>\r\n <\/p>\r\n
<\/p>\r\n
5.2. Adding Clear Tarra From Wintec Action<\/strong><\/h4>\r\nMain Menu > Manage > Automations > Actions ><\/strong> Here, click on Add Action<\/strong>\u00a0button.<\/p>\r\n![\"\"](\"https:\/\/kb.sambapos.com\/wp-content\/uploads\/2025\/07\/Wintec-Scale-06-1024x550.jpg\")
<\/p>\r\n
Action Name: <\/strong>Clear Tarra From Wintec<\/p>\r\nAction Type:<\/strong>Send Data To Scale Device<\/p>\r\nParameters:<\/strong><\/p>\r\nData:<\/strong> <reset><\/p>\r\nAfter completing necessary editings, click on Save<\/strong> button.<\/p>\r\n <\/p>\r\n
<\/p>\r\n
6. Editing Close Ticket Rule<\/strong><\/h3>\r\nMain Menu > Manage > Automations > Rules ><\/strong> Close Ticket ><\/strong> Here, click on Select Actions<\/strong> and add Clear Tarra From Wintec Action<\/strong> into the rule.<\/p>\r\n![\"\"](\"https:\/\/kb.sambapos.com\/wp-content\/uploads\/2025\/07\/Wintec-Scale-07-1024x550.jpg\")
<\/p>\r\n
After completing necessary editings, click on Save<\/strong> button.<\/p>\r\n <\/p>\r\n
<\/p>\r\n
7. Adding Rules<\/strong><\/h3>\r\n7.1. Adding Send Tarra to Wintec Rule<\/strong><\/h4>\r\nMain Menu > Manage > Automations > Rules > <\/strong>Here, click on Add Rule.<\/strong><\/p>\r\n![\"\"](\"https:\/\/kb.sambapos.com\/wp-content\/uploads\/2025\/07\/Wintec-Scale-08-1024x550.jpg\")
<\/p>\r\n
Rule Name:\u00a0<\/strong>Send Tarra to Wintec<\/p>\r\nEvent Name: <\/strong>Automation Command Executed<\/p>\r\nExecute Rule If: <\/strong>Matches<\/p>\r\nAdd Custom Constraint:<\/strong><\/p>\r\nAutomation Command Name|Equals|Send Tarra to Wintec<\/p>\r\n
Select Actions:<\/strong><\/p>\r\nAction: Send Tarra to Wintec<\/strong><\/p>\r\nAfter completing necessary editings, click on Save<\/strong> button.<\/p>\r\n <\/p>\r\n
<\/p>\r\n
7.2. Adding Clear Tarra From Wintec Rule<\/strong><\/h4>\r\nMain Menu > Manage > Automations > Rules > <\/strong>Here, click on Add Rule.<\/strong><\/p>\r\n![\"\"](\"https:\/\/kb.sambapos.com\/wp-content\/uploads\/2025\/07\/Wintec-Scale-09-1024x550.jpg\")
<\/p>\r\n
Rule Name:<\/strong>Clear Tarra From Wintec<\/p>\r\nEvent Name: <\/strong>Automation Command Executed<\/p>\r\nExecute Rule If: <\/strong>Matches<\/p>\r\nAdd Custom Constraint:<\/strong><\/p>\r\nAutomation Command Name|Equals|Clear Tarra From Wintec<\/p>\r\n
Select Actions:<\/strong><\/p>\r\nAction: Clear Tarra From Wintec<\/strong><\/p>\r\nAfter completing necessary editings, click on Save<\/strong> button.<\/p>","protected":false},"excerpt":{"rendered":"In this document, it will be explained how to setup Wintec brand scale with SambaPOS. \u00a0 How it works; Important Note: In order to list Wintec Scale Device under the SambaPOS > Devices section, your SambaPOS version must be 5.7.22 or above.\u00a0\u00a0 \u00a0 \u00a0 1. Installing Scale Module on Samba Market You need to […]<\/p>\n","protected":false},"author":11,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[11],"tags":[],"class_list":["post-31971","post","type-post","status-publish","format-standard","hentry","category-additional-modules"],"_links":{"self":[{"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/posts\/31971","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/users\/11"}],"replies":[{"embeddable":true,"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/comments?post=31971"}],"version-history":[{"count":5,"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/posts\/31971\/revisions"}],"predecessor-version":[{"id":31998,"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/posts\/31971\/revisions\/31998"}],"wp:attachment":[{"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/media?parent=31971"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/categories?post=31971"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/tags?post=31971"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}