{"id":29030,"date":"2023-12-21T08:13:11","date_gmt":"2023-12-21T08:13:11","guid":{"rendered":"https:\/\/kb.sambapos.com\/?p=29030"},"modified":"2026-02-02T13:16:53","modified_gmt":"2026-02-02T13:16:53","slug":"8-16-datalogic-magellan-scale-configuration","status":"publish","type":"post","link":"https:\/\/kb.sambapos.com\/en\/8-16-datalogic-magellan-scale-configuration\/","title":{"rendered":"8.16. Datalogic Magellan (93-9400) Scale Configuration"},"content":{"rendered":"\r\n

In this document, it will be explained how to configure Datalogic Magellan Scale on SambaPOS.<\/p>\r\n

 <\/p>\r\n

How It Works;<\/h3>\r\n

https:\/\/www.youtube.com\/watch?v=Oqiux8mtXjI<\/a><\/strong><\/p>\r\n

 <\/p>\r\n

 <\/p>\r\n

Important Note:<\/span><\/h2>\r\n

In order to use Datalogic Magellan Scale Integration you need to have minimum SambaPOS 5.7.12 version.<\/strong><\/span><\/p>\r\n

 <\/p>\r\n

1.<\/strong>\u00a0Installing Scale Module on Samba Market<\/strong><\/h3>\r\n

You need to install\u00a0Scale Module<\/strong>\u00a0on Samba Market and\u00a0restart the SambaPOS.<\/span><\/strong><\/p>\r\n

Main Menu > Samba Market > Click on\u00a0Install<\/strong>\u00a0button in Scale Module Part.<\/p>\r\n

\"\"<\/p>\r\n

 <\/p>\r\n

 <\/p>\r\n

2. Adding Datalogic Scale as Device on SambaPOS<\/strong><\/h3>\r\n

Go to Main Menu > Manage > Settings > Local Settings > Devices > Add Device > Select Datalogic Scale <\/strong>and click on Save.<\/strong><\/p>\r\n

\"\"<\/p>\r\n

After completing necessary editings, click on Save<\/strong> button.<\/p>\r\n

 <\/p>\r\n

 <\/p>\r\n

3. Adding Automation Command-Action-Rule to Start Scale<\/strong><\/h3>\r\n

You need to click on Start Reading Scale button to start the weighing process.<\/strong><\/span><\/p>\r\n

 <\/p>\r\n

3.1. Adding Automation Command<\/strong><\/p>\r\n

General Settings Section;<\/strong><\/p>\r\n

Main Menu > Manage > Automation > Automation Commands ><\/strong> Here click on Add Automation Command<\/strong><\/p>\r\n

\"\"<\/p>\r\n

Name:<\/strong> Start Reading Scale<\/p>\r\n

Button Header:<\/strong> Start\\rReading Scale<\/p>\r\n

 <\/p>\r\n

Mappings Section;<\/strong><\/p>\r\n

\"\"<\/p>\r\n

In here add a line by clicking on Add<\/strong> button.<\/p>\r\n

After completing necessary editings, click on Save<\/strong> button.<\/p>\r\n

 <\/p>\r\n

 <\/p>\r\n

3.2. Adding Action<\/strong><\/p>\r\n

Main Menu > Manage > Automation > Actions><\/strong> Here, click on Add Action<\/strong><\/p>\r\n

\"\"<\/p>\r\n

Action Name:<\/strong> Start Reading Scale<\/p>\r\n

Action Type:<\/strong> Datalogic Scale Operation<\/p>\r\n

Parameters:<\/strong> True<\/p>\r\n

After completing necessary editings, click on Save<\/strong> button.<\/p>\r\n

 <\/p>\r\n

 <\/p>\r\n

3.3. Adding Rule<\/strong><\/p>\r\n

Main Menu > Manage > Automation > Rules><\/strong> Here, click on Add Rule<\/strong><\/p>\r\n

\"\"<\/p>\r\n

Rule Name: <\/strong>Start Reading Scale<\/p>\r\n

Event Name:\u00a0<\/strong>Automation Command Executed<\/p>\r\n

Execute rule if:\u00a0<\/strong>Matches<\/p>\r\n

Add Custom Constraint:<\/strong><\/p>\r\n

Automation Command Name|Equals|Start Reading Scale<\/p>\r\n

Select Actions:<\/strong><\/p>\r\n

Action:<\/strong> Start Reading Scale<\/p>\r\n

After completing necessary editings, click on Save<\/strong> button.<\/p>\r\n

 <\/p>\r\n

 <\/p>\r\n

 <\/p>\r\n

4. Setting Up Datalogic Scale<\/strong><\/h3>\r\n

4.1. Installing Datalogic Scale Driver<\/strong><\/h4>\r\n

You can find all the necessary file in\u00a0here.<\/a><\/span><\/strong><\/p>\r\n

Extract the Opos folder and open the 610005425 folder and then right click on setup file and select Run as Administrator<\/p>\r\n

\"\"<\/p>\r\n

 <\/p>\r\n

\"\"<\/p>\r\n

 <\/p>\r\n

\"\"<\/p>\r\n

 <\/p>\r\n

\"\"<\/p>\r\n

 <\/p>\r\n

\"\"<\/p>\r\n

 <\/p>\r\n

\"\"<\/p>\r\n

 <\/p>\r\n

\"\"<\/p>\r\n

 <\/p>\r\n

\"\"<\/p>\r\n

 <\/p>\r\n

 <\/p>\r\n

4.2. Setting Up OPOS Properties Editor<\/strong><\/h4>\r\n

You can find the OPOS Properties Editor file from below path;<\/p>\r\n

C:\\Program Files (x86)\\DLSOPOS\\OPE<\/p>\r\n

 <\/p>\r\n

\"\"<\/p>\r\n

\u00a0<\/h4>\r\n

\u00a0<\/h4>\r\n

4.2.0. COM Ports<\/strong><\/h4>\r\n

If you know the COM port connection features of the devices, you can proceed to the below step and enter these features for the scanner and the scale.
If you don’t know, the safest thing is setting device COM Ports as )600 8 N 1 mode by using the Barcode and QR Codes which are found in the booklet.
To do this, read the barcodes and QR codes below in numerical order.
These barcodes permanently change your device’s Com port reading settings.<\/p>\r\n

Enter Barcode;<\/strong><\/p>\r\n

\"\"<\/p>\r\n

 <\/p>\r\n

9600 QR Code;<\/strong><\/p>\r\n

\"\"<\/p>\r\n

 <\/p>\r\n

Exit Barcode;<\/strong><\/p>\r\n

\"\"<\/p>\r\n

 <\/p>\r\n

 <\/p>\r\n

Enter Barcode;<\/strong><\/p>\r\n

\"\"<\/p>\r\n

 <\/p>\r\n

 <\/p>\r\n

Scale Interface Settings;<\/strong><\/p>\r\n

\"\"<\/p>\r\n

 <\/p>\r\n

Exit Barcode;<\/strong><\/p>\r\n

\"\"<\/p>\r\n

 <\/p>\r\n

You can check this user manuel<\/a> <\/strong><\/span>as reference.<\/p>\r\n

 <\/p>\r\n

 <\/p>\r\n

4.2.1. Service Section<\/strong><\/h4>\r\n

\"\"<\/p>\r\n

 <\/p>\r\n

4.2.2. Scanners Section<\/strong><\/h4>\r\n

MagellanSC Part;<\/strong><\/p>\r\n

\"\"<\/p>\r\n

COM Port:<\/strong> You need to select your COM Ports accordingly<\/p>\r\n

Baud Rate:<\/strong> Must be 9600<\/p>\r\n

Data Bits:<\/strong> Must be 8<\/p>\r\n

Stop Bits:<\/strong> Must be One<\/p>\r\n

Parity:<\/strong> Must be None<\/p>\r\n

 <\/p>\r\n

 <\/p>\r\n

QS6000 and QSL Scanner Parts;<\/strong><\/p>\r\n

\"\"<\/p>\r\n

COM Port:<\/strong> You need to select your COM Ports accordingly<\/p>\r\n

Baud Rate:<\/strong> Must be 9600<\/p>\r\n

Data Bits:<\/strong> Must be 8<\/p>\r\n

Stop Bits:<\/strong> Must be One<\/p>\r\n

Parity:<\/strong> Must be None<\/p>\r\n

 <\/p>\r\n

 <\/p>\r\n

RS232Imager and RS232Scanner Parts;<\/strong><\/p>\r\n

\"\"<\/p>\r\n

COM Port:<\/strong> You need to select your COM Ports accordingly<\/p>\r\n

Baud Rate:<\/strong> Must be 9600<\/p>\r\n

Data Bits:<\/strong> Must be 8<\/p>\r\n

Stop Bits:<\/strong> Must be One<\/p>\r\n

Parity:<\/strong> Must be None<\/p>\r\n

After completing necessary editings, click on Apply<\/strong> button.<\/p>\r\n

 <\/p>\r\n

4.2.3. Scales Section<\/strong><\/h4>\r\n

\"\"<\/p>\r\n

COM Port:<\/strong> You need to select your COM Ports accordingly<\/p>\r\n

Baud Rate:<\/strong> Must be 9600<\/p>\r\n

Data Bits:<\/strong> Must be 8<\/p>\r\n

Stop Bits:<\/strong> Must be One<\/p>\r\n

Parity:<\/strong> Must be None<\/p>\r\n

RTS Control:<\/strong> Enabled<\/p>\r\n

Units:<\/strong> Metric<\/p>\r\n

 <\/p>\r\n","protected":false},"excerpt":{"rendered":"

In this document, it will be explained how to configure Datalogic Magellan Scale on SambaPOS.   How It Works; https:\/\/www.youtube.com\/watch?v=Oqiux8mtXjI     Important Note: In order to use Datalogic Magellan Scale Integration you need to have minimum SambaPOS 5.7.12 version.   1.\u00a0Installing Scale Module on Samba Market You need to install\u00a0Scale Module\u00a0on Samba Market and\u00a0restart […]<\/p>\n","protected":false},"author":11,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[11],"tags":[],"class_list":["post-29030","post","type-post","status-publish","format-standard","hentry","category-additional-modules"],"_links":{"self":[{"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/posts\/29030","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/users\/11"}],"replies":[{"embeddable":true,"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/comments?post=29030"}],"version-history":[{"count":25,"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/posts\/29030\/revisions"}],"predecessor-version":[{"id":48900,"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/posts\/29030\/revisions\/48900"}],"wp:attachment":[{"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/media?parent=29030"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/categories?post=29030"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/kb.sambapos.com\/en\/wp-json\/wp\/v2\/tags?post=29030"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}